5 axis CNC milling
CNC milling work for composite plugs, production moulds and large-format tooling. The milling machines are computer-controlled, so digital drawings are required for model milling.
Our CNC milling capability:
- Machines
X: 15.5 m / Y: 6.2 m / Z: 3 m
X: 10.5 m / Y: 4.25 m / Z: 2 m - Yearly capacity
ca 1500-1700 m2 of production moulds - Tolerance
Surface tolerances up to 0.17 to 0.2 mm - Materials
EPS foam, tooling paste, MDF, wood, GRP-based materials - Projects
Over 200 CNC milling projects completed across marine and industrial sectors. - Markets
EU, incl. Finland, Sweden, Norway, Germany, Netherlands, UK, France, Spain, Baltics etc.
Notable projects:
- Powerboat Hull Plug, 12 m
Full hull plug milled from EPS with a tooling paste surface layer, produced for a Finnish boatbuilder as the basis for a new production mould set. - Sailing Yacht Deck Plug, 16 m
Large-format deck plug including anti-slip surface geometry, milled in two sections and assembled on site before mould production. - Aquaculture Tank Plug/Mould, 40 m diameter
Plug for production mould for a large circular fish tank section, milled from tooling board to tight dimensional tolerances for a Norwegian aquaculture equipment manufacturer.
Project gallery:
More questions regards to our products & services?
Then feel free send us a e-mail or give us a call and we’ll go from there!
